How To Change Batteries In Your Lights
Lights are a fun part of musician uniforms for night parades! If you need lights, ask your section shepherd.
If your lights are burnt out or dim you can:
(1) Ask your shepherd for a fresh light.
(2) Replace the batteries yourself using the instructions below. Thanks to our always helpful Band Aids for providing these instructions!
The LR44 (Quantity 3) and CR2032 (Quantity 2) Batteries can be purchased at any hardware store, Walgreens, Walmart, Target or Lowes.
Changing the batteries in the leg lights:.
Step 1 Locate the 2 small phillips screws on the middle of the cover. Remove the two screws.
Step 2 Turn the case over and pry open the cover from the tab located at the end.
Step 3 Remove the two batteries and remember how they came out the direction the new ones are installed is important. Replace with two CR2032 batteries.
Step4 Close the cover and replace the two screws. Test by turning on the light.
Changing batteries in headlights:
Step 1 With a flat blade small screwdriver locate the slot
on the side insert the blade of the screwdriver and twist to pry open the side.
Step 2 Locate the slot at the rear of the light and twist
the blade as in step 1.
Step 3 Locate the batteries under the cover. There are
3 LR44 batteries. they are specific in the direction that they are
placed. (the flat side goes against the spring).
After the batteries are replaced snap the cover back into
place and test by turning on the light.
